Technical Information

HCMP - SERIES FAMILY CURVES

Fluids Pumped

Acids Sulphuric acid, Nitric acid, Mixed acid, Phosphoric acid, Hydrofluoric acid, Hydrocyanic acid, Chromic acid, Acetic acid, Oxalic acid, Lactic acid, Methacrylic acid, Chlorosulfonic acid, Fatty acid, Boric acid
Salts as solution Calcium chloride, Sodium chloride, Sodium carbonate, Ammonium sulphate, Sodium cyanide, Potassium dichromate, Lithium chloride, Ammonium sulphite, Sodium hypochlorite, sodium chlorate
Alkalis Caustic soda, Caustic potash, Ammonia water
Aromatic compounds Benzene, Toluene, Xylene, Phenol, Naphthalene, Dichlorobenzene, Cresol, Methyl naphthalene, Alkylbenzene
Hydrocarbons Butane, Hexane, Propane, Popylene, Ethylene
Monomers and Polymers Styrene, Caprolactam, Chloroprene, Butadiene, Vinyl ether, Acrylonitrile, Acetonitrile, Vinyl chloride, Esterify Products
Alcohol Methanol, Ethanol, Butanol, Hexanol, Isopropyl alcohol, Octyl alcohol, Glycerine, Ethylene glycol, Propylene glycol
Other organic combinations Formaldehyde, Benzaldehyde, Methyl ether, Acetone, ethylene oxide, Propylene oxide, Acrolein, Allyl acetone, Acetic anhydride, Hexane
Halogenides Carbon tetrachloride, Trichloroethylene, Allyl chloride, Phosgene, Liquid chlorine, Anhydrous hydrogen fluoride, Methylene dichloride, Methyl alcohol, Titanium tetrachloride, Silicon tetrachloride, Phosphorus oxichloride, Phosphorus trichloride, Ethylene trichloride, Propylene trichloride, Chloroform, Aluminium chloride
Nitrogen and sulphur combinations Carbon disulphide, Hydrazine, Methyl hydrazine, Aniline
Liquefied gases Freon, Carbon dioxide, Methane, Ethylene, Propane, Propylene, Ammonia
Oils Petroleum, Transformer oil, Edible oil
Heat transfer oils and coolants Synthetic heat transfer, Lithium bromide, Methyl chloride, Other coolants
Water Sea water, Distillate and pure water, Hot water and others
Others Peroxide, Plasticiser, Developer, Detergent

Range / Limitations

  STANDARDISED UPON REQUEST
CAPACITY 250 m3/HR 850 m3/hr
TDH 400m 600m
TEMPERATURE -80°C TO 350°C -120°C TO 450°C
VISCOSITY 100 cSt 350 cSt
DESIGN PRESSURE 42 BARS 400 BARS
MOTOR RATING 120 Kw 200 Kw
MAJOR MATERIALS OF WETTED PARTS SS304, SS316, SS316L, CARBON STEEL HASTELLOY, MONEL, ALLOY 20